Operaciones de corta en el raleo de Pinus patula Schltdl. & Cham. en Cajamarca, Perú

Junior Suarez Franco; Kauê A. Oliveira-Nascimento; Rafael Oliveira Brown; Milo Bozovich-Granados; Renato C. Gonçalves Robert; Julio E.  Arce

doi:10.21704/rfp.v38i2.1894

Authors

Junior Suarez Franco Facultad de Ciencias Forestales, Universidad Nacional Agraria La Molina (UNALM), Av. La Molina s/n, La Molina, Lima, Perú.
Kauê A. Oliveira-Nascimento Programa de Posgrado en Ingeniería Forestal, Universidade Federal do Paraná (UFPR), Av. Prefeito Lothário Meissner, 632, Jardim Botánico, Curitiba - PR, Brasil. https://orcid.org/0000-0003-2252-9792
Rafael Oliveira Brown Programa de Posgrado en Ingeniería Forestal, Universidade Federal do Paraná (UFPR), Av. Prefeito Lothário Meissner, 632, Jardim Botánico, Curitiba - PR, Brasil. https://orcid.org/0000-0002-2695-9338
Milo Bozovich-Granados Facultad de Ciencias Forestales, Universidad Nacional Agraria La Molina (UNALM), Av. La Molina s/n, La Molina, Lima, Perú. https://orcid.org/0000-0003-2093-5121
Renato C. Gonçalves Robert Departamento de Ingeniería y Tecnología Florestal - Universidade Federal do Paraná (UFPR), Av. Prefeito Lothário Meissner, 632, Jardim Botânico, Curitiba - PR, Brasil. https://orcid.org/0000-0003-0598-5112
Julio E. Arce Departamento de Ciencias Forestales - Universidade Federal do Paraná (UFPR), Av. Prefeito Lothário Meissner, 632, Jardim Botánico, Curitiba - PR, Brasil. https://orcid.org/0000-0002-4777-2310

DOI:

https://doi.org/10.21704/rfp.v38i2.1894

Keywords:

costs, estimate, forest harvesting, time and motion

Abstract

The objective of this research was to provide information on the productivity and costs of Pinus patula forest logging operations. To achieve this, 35 trees were selected at random from which 297 logs were obtained. These logs were measured in terms of diameter and length using a winch. This information was used to calculate the volume of wood using the Smalian formula, while The work times were recorded with a digital stopwatch and were used to carry out the time study. In addition, information was collected through interviews, which were used to calculate costs. This study was carried out in a 24-year-old unmanaged forest in the Porcón area, Cajamarca, Peru. The daily productivity of logging was 69.2 m³. For branch removal, a daily productivity of 15.72 m³ was found. The productive time was 3:09 hours (34.05%) of the workday. Branch removal had an average productive time of 3:19 hours (35.86%) of the total. The cost of the chainsaw was found to be 151.96 Soles/day, which was composed of ownership 5.1 S/./day (3.36%), operation 75.76 S/./day (49.85%), and labor 71.1 S/./day (46.79% Therefore, the production of felled, cut and limbed wood has presented a unit cost of 4.5 S/./m³, with the operation and labor costs being the most representative in the case of the chainsaw with 49.84% and 46.8% respectively. while for the ax the cost of labor was the one with the highest incidence with 92.3%.

Downloads

Download data is not yet available.

References

Balimunsi, HK; Kaboggoza, JRS; Abeli, SW; Cavalli, R; Agea, JG. 2011. Working conditions and productivity of logging companies in Mafuga Forest plantation, Western Uganda. Journal of Tropical Forest Science 23(3):232–238.

Bonazza, M; Nicoletti, MF; Cruz, GS; Novack Junior, NS; Sampietro, JA; Silva, PHBM;

Bozovich, M; Campos, R. s. f. Análisis de rendimientos, consumo de combustible y costos en la operación de trozado con motosierra, en una plantación de Pinus oocarpa en Oxapampa. Facultad de Ciencias Forestales. Universidad Nacional Agraria La Molina. Lima, Perú. 15 p.

Campos, R. 1987. Análisis de productividad y costos en extracciones forestales mecanizadas de la zona de Pucallpa. Tesis (Mg. Sc). Lima, Perú, Universidad Nacional Agraria La Molina. 233 p.

Carton, C. 1997. Reforestación y manejo de cuencas en la Cat. Atahualpa Jerusalen Granja Porcon. Cajamarca. 11 p.

Del Pozo, F. 1996. Factor de conversión en aserrío para productos de raleo en plantaciones de pino patula en Cajamarca. Tesis Ing. Forestal, Lima, Perú, Universidad Nacional Agraria La Molina. 90 p.

Merino, J; Chuquicaja, C; Pajares, U. 2017. Estimación del valor de uso directo del suelo en el ámbito del Proyecto Piloto de Forestación (PPF), Granja Porcón, Cajamarca.

Montenegro, R. 2015. Rendimiento en aserrío para trozas provenientes del raleo de una plantación de Pinus patula de 22 años en Cajamarca. Tesis Ing. Forestal. Lima, Perú, Universidad Nacional Agraria La Molina. 103 p.

Llanga, PI. 2012. Evaluación de los sistemas de cosecha en plantaciones de pino (Pinus patula) en forma mecanizada y semi-mecanizada en la empresa Aglomerados Cotopaxi S.A. Tesis Ing. Forestal, Riobamba, Ecuador, Escuela Superior Politécnica de Chimborazo, 88 p.

Silayo, SA; Mugunga, GA. 2014. Productivity and costs modeling for tree harvesting operations using chainsaws in plantation forests, Tanzania. International Journal of Engineering & Technology 3(4):464–472.

Suárez, J. 2016. Análisis de productividad y costos en operaciones de corta en el raleo de una plantación de pinos en Porcón – Cajamarca. Tesis Ing. Forestal. Lima, Perú, Universidad Nacional Agraria La Molina. 63 p.